10
5. Scan the QR code
on the back/side/bottom of
the camera or manually enter the camera’s serial
number into the
Enter camera S/N (serial number)
field. Press
Next
to continue.
6. If you are adding a new camera that does not have a
set password the app will automatically detect that a
new camera is being added. Tap
OK
to proceed.
7. Set a new password for your camera. The password
must be between 8 to 32 characters long and contain
only letters and numbers. When you have finished
setting the password for your camera, enter the
password again in the
Confirm Camera Password
section. Tap
Next
to continue.
8. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish
.
For more information about the Amcrest Cloud app and its features, visit
Amcrest View Pro Setup
To add your PoE camera to the Amcrest View Pro app follow these steps:
•
Make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to your
router.
•
Make sure your camera and mobile device are on the same network during setup.
1.
Download and open the Amcrest View Pro app from the App Store or Play Store.
