Amcrest BC911M14 Скачать руководство пользователя страница 4

5

Package Contents

-  One Camera

-  One Monitor

-  Two Power Adapters

-  Lithium-ion Battery for Monitor

-  User Manual

Care and Maintenance

-  Keep all parts and accessories out of children's reach.

-  Fingerprints or dirt on the lens surface can adversely affect camera performances.

    Avoid touching the lens surface with your fingers.

-  Should the lens become dirty, use a soft, dry cloth to wipe off the lens.

-  Keep the system dry. Precipitation, humidity, and other liquids contain minerals 

   that will corrode electronic circuits.

-  Do not use or store in dusty, dirty areas.

-  Do not use or store in hot areas. High temperatures can shorten the life of electronic

   devices and warp or melt certain plastics.

-  Do not user of store in very cold areas. When the system warms up (to its normal

   temperature), moisture can form inside the case, which may damage  electronic circuit

   boards.

-  Do not attempt to open the case. Non-expert handling of the device may damage the

   system.

-  Avoid dropping or strong shocks.

-  Operate this product using only with the power supply included or provided accessory.

-  Do not overload electrical outlets or extension cords. This can result in fire or

   electric shocks.

-  Do remember that you are using public airwaves when you use the system and that

   sound and video may be broadcast to other 2.4 GHz receiving devices. Conversations,

   even from rooms near the camera, may be broadcast.To protect the privacy of your home,

   always turn the camera off when not in use.

-  Keep the system in proper ventilation when it is operating. Do not use 

   the system in bed, and do not cover the system with cloth, pillow, bag, towel and blanket.

Troubleshooting

You don’t getting any signal

-  Make sure the camera and the monitor are turned on.

-  Make sure the power plugs are firmly installed and plugged in.

If the signal is poor, or if there is interference

-  If there is a microwave oven use in the between the camera and monitor, remove 

   the microwave oven or turn it off, it may be causing interference.

-  Try to put the camera and the monitor closer together if possible, or adjust the antenna

   angle if residing in a multi-story building.

Содержание BC911M14








Отзывы: