Pairing the Sensor
Note:
An Amcrest Smart Home camera
can be linked to either sensor if needed.
For more information, please visit
amcrest.com/support
15
16
Specifications
LED Behavior
Please refer to the table below for details regarding the
LED behavior of the device.
Environment
Indoor
Max Detection Distance
26 feet
Operating Temperature
14°F ~ 113°F
Operating Humidity
0-95% RH
Battery
CR2450
Protocol
Bluetooth 5.0
Max Detection Angle
110°
WARNING:
CHOKING HAZARD
KEEP OUT OF REACH OF CHILDREN.
!
Behavior
Description
Flashing Rapidly
Solid (for 2 seconds)
Sensor is pairing.
Pairing successful
Flashing (3 times)
Pairing failed.
**Try repeating setup.
Flashing Rapidly
(after pairing)
Alarm has been triggered.
Steady Flash
Firmware upgrade.
1. Locate the Alarm Hub on
the main menu.
2. Tap on the “+” icon to pair
the sensor to the hub.
3. Follow the on-screen
prompts to finish pairing the
sensor.
