6
Step 2:
Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the power
connector of the camera.
Step 3:
Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.
Step 4:
Connect the male end of the DC power connector of the power adapter to the female end of the power
connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.
For more information on the installation process described, refer to the image below for more details.
Technical Specifications
Model
AF-2MDT-36-B / AF-2MDT-36-W
Camera
Image Sensor
1/2.9
”
2MP Sony EXmor CMOS
Effective Pixels
1080P (1920 x 1080)
Signal System
NTSC/PAL
Synchronization
Internal Synchronization
Video Output
CVI (1080P@25fps), TVI (1080P@30fps), AHD
(1080P@30fps), CVBS (1280 x 576, 1280 x 480)