5
6)
Using a Phillips head screwdriver, secure the screws and base of the camera to the mounting surface.
7)
Place the cover over the camera and make it flush to the mounting plate and secure it to the mounting
plate using the included star tool.
Connection
To connect your camera to your DVR, please follow the steps provided below:
Step 1:
Connect a BNC (coaxial) cable to the video out connection of your camera.
Step 2:
Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the power
connector of the camera.
Step 3:
Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.
Step 4:
Connect the male end of the DC power connector of the power adapter to the female end of the power
connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.
For more information on the installation process described, refer to the image below for more details.
Technical Specifications
Model
AT5N28-W
Camera
Image Sensor
1/2.7” CMOS
Effective Pixels
5MP, 2592 (H) x 1944(V)
Scanning System
Progressive
Electronic Shutter Speed
PAL: 1/25s
–
1/100000s
NTSC: 1/30s
–
1/100000s
S/N Ratio
>65dB
Minimum Illumination
0.005Lux/F1.2, 0Lux White Light on
Fill Light (White Light) Distance
131.23ft (40m)
Fill Light On/Off Control
Auto, Manual
Fill Light Number
2
Pan/Tilt/Rotation
Pan: 0°
–
360°Tilt: 0°
–
78°Rotation: 0°
–
360°
Lens
Lens Type
Fixed-focal
Mount Type
M12
Focal Length
2.8mm
Max Aperture
F1.2
Field of View
2.8mm: H:95° x V:71° x D:129°
Iris Type
Fixed Iris
Close Focus Distance
5.25ft (1.6m)
DORI Distance
Lens
Detect
Observe Recognize
Identify
2.8mm 221.5ft
(67.5m)
88.6ft
(27.0m)
44.3ft
(13.5m)
22.0ft
(6.7m)
Video
Frame Rate
CVI: PAL: 5M@20fps, 4M@25fps, 1080P@25fps; NTSC: 5M@20fps,
4M@30fps, 1080P@30fpsAHD: PAL: 5M@20fps, 4M@25fps;NTSC:
