6
GB
Fan mode
1. Press the
MODE
BUTTON
[6] until the symbol appears next to
FAN
.
2. Use the
FAN
SPEED
BUTTON
[7] to set the fan speed.
3. Use the
SWING
BUTTON
[3] and the
AIR
FLOW
BUTTON
[4] to adjust the air flow direction.
Sleep button
Press the
SLEEP
BUTTON
[5], the symbol appears on the right hand side of the display
next to
SLEEP
. Press again to release the sleep mode.
In this mode the air flow sound is reduced. Use the sleep mode when you are going
to bed.
In
COOL
mode operation, the room temperature will be raised gradually 2 °C higher
than the setting when
SLEEP
mode was activated.
In
HEAT
mode operation, the room temperature will be lowered gradually 5 °C lower
than the setting when
SLEEP
mode was activated.
When the
SLEEP
MODE
is selected, the display on the unit will dim to be seen well in a
dark room without causing distraction to sleep.
Turbo button
During
COOL
or
HEAT
mode operation, the air flow rate (the amount of air circulating
through the room) can be increased. Press the
TURBO
BUTTON
[9], the symbol
appears on the right hand side of the display next to
TURBO
. Press this button again
to cancel the turbo operation and return to the other air flow rates.
Timer button (timed switching off )
1. Press the
TIMER
BUTTON
[8] to enter the “timed” mode when the unit is switched on.
2. Press this button to set after how many hours the air conditioner should switch
off. The
symbol in the display cycles through 1 2 ... 24 cancel (no
indication) 1... with each press of the button.
Once the set time has elapsed (the
symbol shows the remaining number of
hours) the air conditioner will switch itself off. To cancel this function before the set
time has elapsed, press the
TIMER
BUTTON
[8] again.
Timer button (timed switching on)
The air conditioner is switched off (stand-by).
1. Press the
TIMER
BUTTON
[8] to enter the “timed” mode.
2. Press this button to set after how many hours the air conditioner should switch
on. The
symbol in the display cycles through 1 2 ... 24 cancel (no
indication) 1... with each press of the button.
3. Set the desired operation, temperature, fan speed, etc.
Once the set time has elapsed (the
symbol shows the remaining number of
hours) the air conditioner will switch itself on. To cancel this function before the set
time has elapsed, press the
TIMER
BUTTON
[8] again.
Hold button
