Amcor PLVM 16000E, Инструкция по эксплуатации, Страница: 6 / 12

INSTALLATION
OPERATION
WARNING! Before using the air conditioner it should be left in an upright position for at least 2 hours.
This unit can easily be moved from one room to another. In doing so keep this in mind:
– Ensure that the unit is positioned upright, on a level surface and 50 cm away from obstacles.
Cooling mode
- After machine turns on, default value is cooling mode with 22 ℃ and low fan speed.
- Press “ MODE” to select cooling mode, cooling mode indictor turns on .
- Press “ UP” or “ DOWN” to adjust temperature ( from 16
℃ to 31 ℃ ).
- Press “SPEED” to select fan speed(Auto
，
high ,medium and low)
5
– Do not operate the unit inside the bathroom, shower, or in any other very humid environment.
– Connect the hose to the unit by turning it clockwise (at least 5 turns).
– Similarly, connect the hose to the slide bar connector as far as possible.
– Place the telescopic slide bar in the open window or door and
adjust the length to as much open space as possible.
– Put the slide bar connector in the opening in the telescopic slide
bar.
– Close the window or door as much as possible to prevent outside
air entering the room.
– Ensure that the slide bar connector has a free ow outside.
Important
The exhaust hose can be extended from 660 to 2000 mm for mounting. This length
has been designed especially according to the of the air conditioner. Do not
use an extension or exchange for a erent hose as that may lead to malfunctioning. The
exhaust air must ow freely, any blockage can lead to overheating of the air conditioner.
Take care to prevent any sharp bow or bend in the exhaust.