Amcor AIR PROCESSOR 2000, Инструкция по эксплуатации

Страница: 6 / 32

Using the scent release function (optional)
Your air purifier can also disperse a pleasant scent. A scent release capsule may be purchased
from your dealer or directly from us. This unit comes with one scent release capsule. These
scents are pleasant, unobtrusive and subtle.
To use the scent release function:
The capsule is installed at the bottom of the lower enclosure of your appliance (see fig. 1).
To install, SWITCH OFF the unit. Remove the capsule from its protective wrapping. Open the
capsule cap by turning it in the direction opposite to that indicated by the arrow on the cap
(see fig. 1). Insert the capsule in the cap until the tabs catch the cap (see fig. 2). Insert the
complete cap (with the capsule inside it) into the air purifier and turn the cap in the direction
of the arrow (see fig. 3). Your air processor will now release a pleasant fragrance during
operation.
To replace the capsule, SWITCH OFF the unit. First remove the cap from the air processor by
turning it in the direction opposite to that indicated by the arrow (see fig. 1). Press the tabs
together and remove the used capsule (see fig. 4). Replace the used capsule with a new one
(see fig. 3).
To deactivate the scent release function:
Remove the capsule and store in a glass jar with a tight lid (if the capsule is still active). Store
the empty cap inside the lower enclosure.
Scent Emitter
Fig. 1 Fig. 2
Fig. 4 Fig. 3