AMC XIA100, Инструкция по установке и эксплуатации, Страница: 7 / 16

5
A/C OUTLET
INPUTS
OPTION: COAXIAL/OPTICAL INPUT
The A/C convenience outlet is fitted so
that other components can be powered
when the AC line cord of your amplifier is
plugged into mains outlet.
You must fit an Standard 3 pin plug,
available from most specialist dealers.
All audio Inputs and tape outputs are via
gold plated RCA type phono connectors.
All the phono sockets on your AMC
amplifier are marked "L" for left and "R"
for right channels, with the left channels
nearer the top of the cabinet.
Your
connection leads will have a white or
black plug for left, and a red plug for right.
The input is suitable for moving magnet
(MM) & Moving Coil (MC) cartridges. To
switch between MM & MC, please open
top cover and switch the MM/MC switch
on PHONO Module to the position you
will like to select. The PHONO Module is
located behind PHONO INPUT RCA
Jacks fixed to the side chassis. The plugs
on your turntable lead should be
connected to the disc input sockets on
the rear panel of your amplifier.
The Ground Terminal is for you to
connect ground wire of your turntable in
order to eliminate possible interference
and hum loop for best possible sound
quality.
The PHONO Module can be replaced
with AMC proprietary designed DAC to
convert the PHONO INPUT into a
COAXIAL/OPTICAL INPUT.
AMC 24bit/192KHz DAC Module,
MD1108s, can replace PHONO module to
have digital input in XIA100/XIA150.
The Coaxial/Optical switch can select
digital soruce.
The iPod/DAC input is suitable for use
with any iPod/DAC player. Connect your
iPod/DAC using the RCA sockets marked
iPod/DAC.
The video input is suitable for most TV's
with an audio output.
Connect your TV
using the RCA sockets marked "VIDEO."
Note: The A/C outlet is UNSWITCHED by
the power switch on your amplifier.
The maxinum output current rating
of A/C outlet is 1A.
UNDER NO CIRCUMSTANCES SHOULD
THE CASE OF THE AMPLIFIER BE
OPENED BY ANYONE OTHER THAN A
QUALIFIED ENGINEER, AS DANGEROUS
VOLTAGES ARE PRESENT INSIDE. ANY
UNAUTHORIZED REPAIR MAY INVALIDATE
YOUR WARRANTY.
PHONO INPUT (OPTION COAXIAL/
OPTICAL IN)
iPod/DAC INPUT
RECORD OUTPUT
CD INPUT
TUNER INPUT
VIDEO INPUTS
The CD input is suitable for use with any
CD player. Connect your CD player to he
amplifier using the RCA sockets marked
"CD".
The Tuner input is suitable for use with
most AM/FM, DAB+, Internet tuners.
Connect your tuner to the amplifier using
the RCA sockets marked "TUNER".
This output is suitable for use with most
Audio or video recorders.
Connect the "record" leads of your
recorder to the RCA sockets marked
"RECORD" on the rear of your amplifier
using RCA/RCA leads.