AMC XG Скачать руководство пользователя страница 11

All the safety and operating instructions should be read

before the appliance is operated.

The safety and operating instructions should be retained for

future reference.

All warnings on the appliance and in the operating instructions

should be adhered to.

All operating and use instructions should be followed.

The appliance should not be used near water - for example,

near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, etc.

The appliance should be used only with a cart or stand that is

recommended by the manufacturer.
An appliance and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the appliance

and cart combination to overturn.

This equipment is not designed for use mounted on a wall or a

ceiling.

The appliance should be situated so that its location or position

does not interfere with its proper ventilation. For example, the

appliance should not be situated on a bed, sofa, rug, or similar

surface that may block the ventilation openings, or placed in a

built-in installation, such as bookcase or cabinet that may

impede the flow of air through the ventilation openings.

The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

The appliance should be connected to a power supply only of

the type described in the operating instructions or as marked

on the appliance.

Power-supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from

the appliance

The appliance should be cleaned only as recommended by

the manufacturer.

The power cord of the appliance should be unplugged from the

outlet when left unused for a long period of time.

Care should be taken so that objects do not fall and liquids are

not spilled into the enclosure through openings.

The user should not attempt to service the appliance beyond

that described in the operating instructions. All other servicing

should be referred to qualified service personnel.

The appliance should be serviced by qualified service

personnel when:

a) The power-supply cord or the plug has been damaged; or

b) Objects have fallen, or liquid has been spilled into the

appliance; or

c) The appliance has been exposed to rain; or

d) The appliance does not appear to operate normally or

exhibits a marked change in performance; or

e) The appliance has been dropped, or the enclosure is

damaged.

(APPLIES TO TUNER AND RECEIVERS ONLY)
An outdoor antenna should be located away from power lines.

(APPLIES TO TUNER AND RECEIVERS ONLY)
If an outside antenna is connected to the receiver, be sure the

antenna system is grounded so as to provide some protection

against voltage surges and built up static charges.

Section 810 of the National Electrical Code, ANSI/NFPANo.

70-1984, provides information with respect to proper

grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode. See Figure.

a) Use No. 10 AWG (5.3 mm ) copper, No. 8 AWG (8.4 mm )

aluminum, No. 17 AWG (1.0 mm ) copper-clad steel or

bronze wire, or larger, as a ground wire.

b) Secure antenna lead-in and ground wires to house with

stand-off insulators spaced from 4-6 feet (1.22-1.83 m)

apart.

c) Mount antenna discharge unit as close as possible to where

lead-in enters house.

d) Use jumper wire not smaller than No.6 AWG (13.3 mm )

copper, or the equivalent, when a separate antenna-

grounding electrode is used. See NEC Section 810-21(j).

1. READ INSTRUCTIONS

2. RETAIN INSTRUCTIONS

3. HEED WARNINGS

4. FOLLOW INSTRUCTIONS

5. WATER AND MOISTURE

6. CARTS AND STANDS

6A.

7. WALL OR CEILING MOUNTING

8. VENTILATION

9. HEAT

10. POWER SOURCES

11. POWER-CORD PROTECTION

12. CLEANING

13. NON USE PERIODS

14. OBJECT AND LIQUID ENTRY

15. SERVICING

16. DAMAGE REQUIRING SERVICE

17. POWER LINES

18. OUTDOOR ANTENNA GROUNDING

 

 

 

 

SAFETY INSTRUCTION

S3125A

PORTABLE CART WARNING

Antenna Lead

In Wire

Ground
Clamp

Electric

Service

Equipment

Power Service Grounding

Electrode System
(NEC Art 250 Part H)

Ground Clamps

Antenna
Discharge
Unit (NEC
Section 810.20)

Grounding Conductors
(NEC

Section 810.21)

Antenna Grounding According to

the National Electrical Code

National Electrical Code

Available from Library, book

stores, or National Fire Protection

Association (Batterymarch Park,

Quincy. MA 02269).

AMC 21-3004

Содержание XG













Отзывы: