AMC SPS200, Инструкция по установке и эксплуатации, Страница: 4 / 8

1 2 3
3
1.Power Switch:
CAUTION: Before plugging power cord to power outlets, please set the AC
Voltage Selector to the line voltage.
2.Power LED:
3.Protection LED:
Switching to "I" will turn on the SPS200. Switching to "O" will turn the unit off.
The green LED lights when the SPS200 is turned on.
The LED will turn off if the unit is turned off or in protection mode.
The red LED lights when the unit is self protected against short circuit, over current or
over voltage. Turn off power switch and take away short circuit or over current or over
voltage. Wait for more than 20 seconds before switching SPS200 on again.
FRONT PANEL CONTROLS