FIXATION AND CONNECTIONS
Open the keypad housing pushing the flap in the lower part with a screwdriver by keeping the keypad door
open.
Take the posterior part of the keypad and fix it to the wall (the electronic board remains fixed to the anterior
part).
During the fixation pay attention to the tearing element, if you want to have an anti-tearing protection it is
necessary to fix it to the wall with a screw, so as to keep the tamper switch of the keypad closed.
Set the keypad address by using the dip-
switches (refer to your Alarm Panel’s Technical Manual)
Connect the supply and data terminals to the bus terminals on the control unit board, do not leave any
copper debris on the circuit board.
The wiring must be carried out only when the board is unsupplied.
Close the case by leaning the anterior part onto the clips of the posterior part. Then push the anterior part of
the housing until it clicks and fits together with the posterior part.
For audio, connect a wire (preferably external to the data cable) from the terminal PHONE of the C24 to the
audio terminal of the keyboard.
In the back of the keyboard there is a jumper, used to apply the end of line resistor on the keyboard with
audio support.
IT'S IMPORTANT THAT IN CASE OF MORE KEYBOARD CONNECTION, AT LEAST ONE HAVE THE
JUMPER “ EOL ” END OF LINE CLOSED. ( IN CASE OF USE WITH ONE KEYBOARD JUMPER MUST
BE CLOSED ).
Our products/systems comply with the essential requirements of EEC directives. Installation must be carried out following the local
installation norms by qualified personnel.
AMC Elettronica S.r.l. refuses any responsibility when changes or unauthorized repairs are made to the product/system. It is
recommended to test the operation of the alarm product/system at least once a month. Despite frequent testing and due to, but not
limited to, any or all of the following: tampering, electrical or communication disruption or improper use, it is possible for the
product/system to fail to prevent burglary, robbery, fire or otherwise. A properly installed and maintained alarm system can only reduce
the risk that this happens.
Audio cable
Bus cable
“ System armed/disarmed
–
Zones status
–
Zones in alarm
etc.”
