Operating Receiver
By using the “
” or “
”
buttons you can directly switch between the factory-preset
frequencies or channels presets. The display starts flashing by indicating that your selection is
active. Press SET button to set selected channel or frequency.
1. Automatic Transmitter setup (IR)
Press "SET" button, The LCD Display should display “PRG IR” as below. Put the
receiver IR window to match the transmitter IR window, and hold for 2-3
seconds, this scans for a clear channel and sets the receiver to that channel.
.
2. Display control
Press "SET" button twice, The LCD Display should display “DISPL” as below.
On the receiver you can choose whether the frequency or the channel number will by
displayed in display. Select the “DISPL” menu by pressing the “SET” button. With the “
” or
“
”
buttons you can choose between: channel number: “CHANNEL” or frequency: “FREQU”
After selection display starts flashing, at this moment press SET button to record your settings.
Press SET button one more time to return the main display.