AMC 2A Series, Руководство пользователя, Страница: 9 / 10

Specifications
Power specifications 2A400 2A600
Rated output power (8 Ω) (Stereo mode) 2x400W 2x600W
Rated output power (4 Ω) (Stereo mode) 2x700W 2x1050W
Rated output power (8 Ω) (Bridge mode) 1250W 1750W
Rated output power (4 Ω) (Bridge mode) 1700W 2300W
Input Sensitivity 0.775 V (0 dBu)/ 1.0 V (2.2dBu)/ 1.44 V (5.3 dBu)
Input Impedance
10k
Ω
unbalanced
Frequency Response 15 Hz - 25 kHz: ±1 dB
Distortion THD+noise 1kHz in full power < 0.03% < 0.035%
Signal to Noise Ratio > 102dB > 105dB
Slew rate 40V/uS
Damping Factor (1 kHz @ 8 Ω) > 400 :1
General specifications
Amplifier Protection
Full short circuit, open circuit, thermal, soft start, DC
voltage.
Amplifiers class AB
Controls Front: AC switch, channel 1 & 2 volume knobs
Indicators
Power-on, signal, clip, protect, bridge, parallel
Connectors (each channel)
Input: balanced Phoenix and XLR
Output: Speakon, blinding post.
Power Requirements
~230V AC 50Hz
Fuses
T8A/250V T12A/250V
Dimensions (HxWXD) 89x482x453mm
Weight - Net 22.5 kg 25 kg
The specifications above are correct at the time of printing of this manual. For improvement purposes, all
specifications for this unit, including design and appearance, are subject to change without prior notice.