AMC 2100MKII, Инструкция по установке и эксплуатации

Страница: 4 / 12

2
INSTALLATION NOTES
Since the AMC 2100MKII generates
m o d e s t a m o u n t s o f h e a t , a d e q u a t e
ventilation is required. Do not place the
amplifier on a soft surface such as a
carpeted surface that may block the
ventilation holes of the bottom cover.
Also, avoid obstructing the ventilation
holes in the top cover.
To prevent the risk of fire or
shock, do not allow any liquid or moisture
to enter into the internal parts of this
product. If any liquid accidentally enters
this product, shut off the power and
remove the AC power cord immediately. If
the liquid is anything other than clean
water or pure alcohol, have the product
e x a m i n e d b y a s e r v i c e t e c h n i c i a n .
Servicing of this product should be
referred to a qualified service technician.
Your AMC amplifier is supplied set to
work on your local mains supply voltage.
Check that your local mains supply
voltage agrees with the voltage setting
i n d i c a t e d o n t h e b a c k p a n e l o f t h e
amplifier. If not, please contact your
dealer or national distributor for details on
how to proceed further.
The cores of the mains lead are coloured
in accordance with the following code:
Blue
-Neutral
Brown -Live
Note: Export units for certain markets
have moulded mains plugs fitted as
standard.
As the colours in the mains lead may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be
c o n n e c t e d t o t h e t e r m i n a l w h i c h i s
marked by the letter N, or coloured black
or blue. The wire which is coloured brown
must be connected to the terminal which
is marked by the letter L, or coloured red
or brown.
CAUTION: