AMBROGIO 6060BA0 Скачать руководство пользователя страница 24

Страница: 24 / 30

User’s manual

TROUBLESHOOTING GUIDE

TROUBLESHOOTING

The information below is designed to help identify and correct any faults and/or malfunctions which may occur during operation.

Some failures can be resolved by the user; others require specific technical skills or special abilities and therefore must only be

resolved by qualified personnel with certified experience gained in the specific field of intervention.

Warning – Caution

Safely stop the robot (see “Robot Safety Stop”) in case it is necessary to check the robot, in order to avoid

danger of accidental blade starting.

Problem

Cause

Remedies

The robot is very noisy.

Cutting blade damaged.

Replace the blade with a new one (see “Blade

Replacement”).

Cutting blade fouled (tapes, ropes,

plastic fragments, etc.).

Stop the robot safely (see “Robot safety stop”).

Warning – Caution

Use protective gloves to avoid the risk of

injury.

Remove the debris from the blade.

The robot was started too close to

obstacles (less than 1 m. (40 ") away)

or in the presence of unexpected

obstacles (fallen branches, forgotten

objects, etc.).

Stop the robot safely (see “Robot safety stop”).

Remove the obstacles and restart the robot.

Electric motor failure.

Have the motor repaired or replaced by the

nearest authorised service centre.

Too high grass.

Increase the cutting height (see “Cutting height

adjustment”).

Carry out a preliminary cutting of the area with a

normal lawnmower.

The work area is not

completely mowed.

Not enough work hours.

Start the robot every day.

Cutting blade fouled with deposits and/

or residuals.

Stop the robot safely (see “Robot safety stop”).

Warning – Caution

Use protective gloves to avoid the risk of

injury.

Clean the cutting blade.

Cutting blade worn.

Replace the blade with original spare parts (see

“Blade Replacement”).

Work area is too big compared to the

actual capacity of the robot.

Adjust the work area (see “Technical

Specifications”).

The batteries are about to end their life

cycle.

Replace the batteries with original spare parts.

The batteries do not recharge

completely.

Clean and remove any oxidizations from the

contact points of the batteries (see “Robot

cleaning”). Recharge the batteries for at least 4

hours.

Содержание 6060BA0































Результаты поиска

Содержание 6060BA0

Отзывы:

Бренды по названию

Популярные бренды

AMBROGIO 6060BA0, Руководство пользователя

Результаты поиска

Содержание 6060BA0

Отзывы:

Бренды по названию

Популярные бренды