Version 1.1
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 4
1.
Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as
shown in Figure 1 .
Figure 1
2.
BEFORE
inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter.
3.
Channel Number:
The WS-3000 supports up to eight transmitters, and includes three
transmitters. To set each channel number (the default is Channel 1), change Dip Switches 1, 2
and 3, as referenced in Figure 2.
4.
Temperature Units of Measure:
To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Figure 2.
Switch in down position.
Switch in up position.
