background image

 

Version 1.0  

 

©Copyright 2016, Ambient LLC. All Rights Reserved. 

 

 

 

Page 4 

advance to the next setting. 

6.

 

Day

. Press the [+] or [-] key to increase or decrease the day.    Press the 

SET

 key to advance 

to the next setting. 

7.

 

Year

. Press the [+] or [-] key to increase or decrease the year.    Press the 

SET

 key to advance 

to the next setting. 

8.

 

Temperature Units of Measure

. Press the [+] or [-] key to switch between °F and °C units of 

measure. Press the 

SET

 key to advance to the next setting. 

9.

 

Max/Min  Clearing

.    The  Max/Min  can  be  programmed  to  clear  daily  (at  midnight)  or 

manually.  Press  the  [+]  or  [-]  key  to  switch  between  “Clears  Daily”  and  Clears  Manually. 
Press the 

SET

 key to exit setting. 

5.2 Day Month/Year/Seconds Display 

Press the 

SET

 key (do not hold) to toggle between the Day/Month, Year and Seconds. 

5.3 Alarm Mode 

The WS-28 includes time alarm, indoor and outdoor temperature alarm. 
       

When an alarm condition is exceeded, the alarm icon will flash 

  (visual) and the alarm beeper will 

sound (audible). To silence the beeper, press any key.     
 
To view the current alarm settings, press the 

Clear/- 

button to enter the alarm mode. 

5.3.1 Alarm Defaults 

 

Channel  Default 

Condition 

Max ALARM      (temperature) ºF  Min ALARM    (temperature) ºF 

Indoor 

OFF 

68 

32 

Outdoor 

OFF 

86 

14 

 

 

      5.3.2 Setting the Alarms 

 
In alarm mode, press and hold the 

SET

 key for three seconds. The alarm parameter will begin flashing. 

To adjust the alarm parameter, press the [+] or [-] key to increase or decrease the alarm setting slowly, 
or press and hold the [+] or [-] key for three seconds to increase or decrease the alarm setting rapidly. 
 

Press the 

SET

 key for three seconds to turn on (the alarm icon will appear 

) and off the alarm. 

 
To save the alarm setting and proceed to the next alarm parameter, press (do not hold) the 

SET

 key. 

 
The following is a list of the individual alarm parameters that are set (in order): 

1.

 

Alarm hour 

2.

 

Alarm minute 

3.

 

Indoor temperature Max alarm 

4.

 

Indoor temperature Min alarm 

5.

 

Outdoor temperature Max alarm 

6.

 

Outdoor temperature Min alarm 

Once  the  alarm  setting  completed,  press  the 

Clear/- 

button,  or  wait  15  seconds  for  timeout  to 

return to normal mode. 

Содержание WS-28









Отзывы: