Version 1.10
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 12
Figure 4
4.4 Min/Max Mode
While in Normal Mode, press the
MIN/MAX
key to enter the maximum mode, and the
MAX
icon
and maximum records will be displayed and begin flashing.
Press
MIN/MAX
key again to enter the minimum mode, and the
MIN
icon and minimum records will
be displayed and begin flashing.
Press
MIN/MAX
key again to return the Normal Mode.
In the maximum (or minimum) reading Mode, press the
+
key to display the specific maximum (or
minimum) value you wish to reset. This value will begin flashing with the time and date time stamp at
which the maximum (or minimum) value occurred. Select the
+
key again to proceed to the next
parameter, in the following order:
1.
Indoor humidity maximum (or minimum)
2.
Indoor temperature maximum (or minimum)
3.
Outdoor humidity maximum (or minimum)
4.
Outdoor temperature maximum (or minimum)
5.
Pressure maximum (or minimum)
Press the
SET
key for two seconds to reset the specific value (that is flashing) and associated date and
time to the current reading.
Press the
SNOOZE
key or wait 30 seconds for the programming mode to timeout, and the Min/Max
mode will return to Normal Mode.
4.5
Other Console Features
The following section describes additional console features.
4.5.1
Weather Forecasting
Note:
The weather forecast or pressure tendency is based on the rate of change of barometric
pressure. In general, when the pressure increases, the weather improves (sunny to partly cloudy) and
when the pressure decreases, the weather degrades (cloudy to rain).
It may take several days to begin forecasting the weather. In the mean time, there may be no trend
arrows and the both icons display partly cloudy.
The weather forecast is an estimation or generalization of weather changes in the next 24 to 48 hours,
and varies from location to location. The tendency is simply a tool for projecting weather conditions
and is never to be relied upon as an accurate method to predict the weather.
