Version 1.10
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 11
Indoor humidity low alarm
Indoor temperature low alarm
Outdoor humidity low alarm
Outdoor temperature / dew point low alarm
Pressure low alarm
In the alarm mode, Press the
+
key or
MIN/MAX
key to change or scroll the alarm value.
Hold the
+
key or
MIN/MAX
key for 3 seconds to change the number rapidly. Press the
ALARM
key
to select the alarm on or off (if alarm is enabled, the speaker icon on the LCD will be turned on
indicating the alarm function has been enabled).
Press the
SET
key to confirm the setting and continue pressing the
SET
key to toggle through each
alarm mode until it returns to the normal display mode.
Press the
SNOOZE
key or wait 30 seconds for the programming mode to timeout, and the alarm
mode will return to the normal mode.
4.3.3
Cancelling the Alarm
When an alarm condition has been activated, the specific alarm will sound and flash for 120 seconds.
Press any key to cancel the alarm.
When an alarm condition is activated again within 10 minutes, the alarm will not sound but will
continue to flash until the weather condition is stable. This feature is useful to avoid repeated
triggering for the same alarm value.
The alarm will reset automatically once the value has fallen below the set value, or if a new value is
entered.
4.3.4
Outdoor Alarm – Temperature vs. Dew Point
When the outdoor weather alarm has been triggered, it will flash on the LCD display and the general
outdoor alarm icon and high/low alarm icon will flash. For example, in the outdoor temperature
display mode, when dew point high alarm is triggered the
DEW POINT
icon will flash along with
general outdoor alarm icon and high alarm icon, indicating that the current alarm source is from dew
point.
