Version 1.1
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page
8
switch between °F and °C units of measure.
11.
Max/Min Clearing
. Press the
SET
key again to set the max/min clearing mode (CLR
ON/OFF). The Max/Min can be programmed to clear daily (at midnight) or manually. Press
the
[CH/+]
key to switch between “Clears Daily”
and Clears Manually.
12.
Backlight Color Setting (default: Outdoor or CH1)
. Press the
SET
key again to set the
backlight color defined parameter (the
LED
icon will be displayed). Press [CH/+] key or
[] key to toggle between
OUT
(uses the channel 1 temperature to automatically
display backlight color),
IN
(uses the indoor temperature to automatically display backlight
color) or
USE
(manually set your own backlight color to one of 11 choices).
The following section is based on the OUT, IN or USE setting selected.
12.1
OUT
Backlight Color Setting (reference Figure 4).
12.2
Outdoor Backlight Color Low (OUT default: 10):
Press the
SET
key again to
change the lower range of the color changing backlight spectrum (the
LOWER
icon will
be displayed). Press the [CH/+] key or [] key to adjust the low temperature
limit.
12.3
Indoor Backlight Color High (default: 100):
Press the SET key again to change
the upper range of the color changing backlight spectrum (the
UPPER
icon will be
displayed).
12.4
IN
Backlight Color Setting (reference Figure 4).
12.5
Indoor Backlight Color Low (IN default: 58):
Press the
SET
key again to change
the lower range of the color changing backlight spectrum (the
LOWER
icon will be
displayed). Press the [CH/+] key or [] key to adjust the low temperature
limit.
12.6
Indoor Backlight Color High (default: 85):
Press the SET key again to change the
upper range of the color changing backlight spectrum (the
UPPER
icon will be
displayed).
12.7
USE
Backlight Color Setting (reference Figure 4).
12.8
Backlight Color (USE):
Press the
SET
key again to manually select the backlight
color (the
COLOR
icon will be displayed). Press [CH/+] key or [] key to
choose among 11 different colors.