1.
Lift the hand crank from the cradle, as shown in Figure 2.
Version
1.3
©Copyright
2011,
Ambient
LLC.
All
Rights
Reserved.
Page
5
.
2.
Turn the hand crank either clockwise or counterclockwise at about two cranks per second for
3-5 minutes to activate the internal battery for initial use, or when the unit has not been used
for more than 60 days. The red battery charging light illuminates when charging, as shown
in Figure 1
3.
For subsequent charges, turn the hand crank for one minute to produce 70 minutes of
continuous light for the LED flashlight, or 16-20 minutes of continuous radio usage (subject
to volume) or approximately 3-5 minutes of talk time on the cell phone (your results may vary
due to phone variation).
5.
Operation
5.1
Flashlight Operation
Turn the light on and off with the light switch on the top of the unit (Figure 1).
NOTE:
The flashlight switch does not operate in Weather Alert Mode.
5.2
Radio Operation
The ADVENTURER includes a digital LCD display (Figure 4) with backlighting, with the following
push button controls:
•
POWER
. Turns on and off the radio. Transitions from clock display to radio tuner display.
•
MODE
. Switches the radio band between AM, FM, weather band, and weather band alert
mode.
•
TUN+:
Adjusts the radio frequency up
•
TUN-:
Adjusts the radio frequency down
•
VOL+:
Adjusts the radio volume up
•
VOL-:
Adjusts the radio volume down
Figure 4
5.3
Time
When first powered up, the time will default to 12:00 AM.
1.
Set 12Hr/24Hr Mode.
Press and hold the
MODE
button for two seconds to enter the time
setting mode. 12 Hr will begin flashing. Press the
TUN+
button to switch between 12 hour
and 24 hour time mode. Press the
MODE
button to proceed to the next step.
2.
Set Hour.
Press the
TUN+
or
TUN-
to adjust the hour up or down. Hold the
TUN
button to
change rapidly. Press the
MODE
button to proceed to the next step.
3.
Set Minute.
Press the
TUN+
or
TUN-
to adjust the minute up or down. Hold the
TUN
button
to change rapidly. Press the
MODE
button to exit the time setting mode.