Version 1.0
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 5
3.1
Refrigerator/Freezer Mounting
The sensor includes a detachable suction cup that may be used to secure the remote sensor to the
interior or exterior surface of the refrigerator/freezer, as shown in Figure 4.
For better reception, we recommended installing the sensor to the outside of the refrigerator/freezer. If
the refrigerator/freezer is a metal box, the wireless signal cannot escape, and the sensors must be
placed on the outside.
Figure 4
To attach the suction cup to the remote sensor, reference Figure 5.
1.
Locate the mounting hole on the back of the unit.
2.
Press the suction cup into the mounting hole.
3.
While applying pressure with your thumb, twist the suction cup until fully inserted.
4.
Wet the back of the suction cup and apply to clean, smooth, flat surface.
