Version 1.0
©Copyright 2019, Ambient LLC. All Rights Reserved.
Page 2
3.
Parts
Figure 2
4.
Warnings
WARNING
: Improper installation of the mounting kit to your home or building may result in
leaks. We recommend a licensed roofing specialist for invasive installations.
WARNING
: Any metal object may attract a lightning strike, including your weather station and
mount. Never install your weather station in a thunderstorm.
WARNING:
We recommend properly grounding the mount to avoid extensive damage to the
weather station and structure. Consult a licensed electrician or local lightning detection expert prior to
installing a ground wire.
WARNING:
Installing your weather station in a high location may result in injury or death.
5.
Recommended Tools and Materials
Phillips Precision screwdriver Size: #2 Phillips.
7/16” wrench
Level or Plumb
Drill
6.
Mounting Installation
1.
In a fence post or other flat vertical surface, drill two holes, using one of the 1-1/8”
saddles as a guide.
2.
Drill another set of holes at least 12” away from the first holes.
3.
Using the lag screws, secure the saddles and into the post.
4.
Tighten the lag screws until the tube will not slide up or down.
