50D0104 RCSTE Rel 0 Feb 10 2006
Page 5 of 7
Ambient Technologies
A Division Of Monessen Hearth Systems
Manual Mode
1. Press the ON button once to turn on the appliance.
2. Press the OFF button to turn it off.
Thermostatic Mode
1.
Press the AUTO button to enter the thermostatic mode. “SET” temp icon
will appear on the lower LCD screen
2.
In thermostatic mode, press the ON/
▲
button or OFF/
▼
button to set the
desired set temperature.
3.
Once the setting is completed, the transmitter will automatically turn on the
fireplace when the room temperature is below the set temperature and turn off the appliance when the
room temperature is above the set temperature within 1 degree.
4.
There will be a slight delay in the response of the unit (on/off) to a temperature. Room temperature is
monitored every 3 minutes.
5.
Press the Auto button to exit the thermostatic mode (Return to Manual Mode). The “SET” temp icon will
disappear on the lower LCD display. The transmitter will be in the manual on/off mode
.
Low Battery Detection
1. Battery voltage is checked once a minute. When the battery voltage drops to a
certain level, the low-battery warning will come on, and the transmitter will turn
off the appliance. The transmitter will not function anymore until fresh batteries
are installed.
2. When the batteries are low, the LCD shows a low battery indicator. The low
battery warning will be displayed in any mode.
3. The transmitter will not operate with low batteries. Change the battery before the
battery is too weak for normal operation.
TURN THE UNIT OFF BEFORE
REPLACING BATTERIES
.
Child-Proof Protection
1. Press and hold ON and OFF buttons simultaneously for 3 seconds to enter child-
proof mode.
2. The transmitter will not work until child-proof mode is deactivated by pressing
the ON and OFF buttons simultaneously for 3 seconds again to exit child-proof
mode.
Transmitter Thermal Shutdown
1. If transmitter measures a room temperature exceeding 99 degrees Fahrenheit, the
LCD will display "HI" and the transmitter will turn off the appliance.
2. Transmitter will not function until the room temperature has dropped below 99
degree Fahrenheit.
3. If transmitter measures a room temperature less than 40 degrees Fahrenheit, the
LCD will display “LO” and
NO SIGNAL will be sent to turn on the appliance
.
f i r e - p a r t s . c o m
