16th December 2020
Li
g
htin
Controller User Manual
Pa
e of
2
4
Table of Contents
Introduction
3
Connections
Power Requirements
Confi
urin
The Module
Storin
In Memory
Resettin
To Factory Default
Mode Reference Table
Fixin
Method
Specifications
Ambient Power
E&OE
Страница 1: ...16th December 2020 Li g htin g Controller User Manual Pa g e of 1 4 Li g htin g Controller User Manual AP087 Ambient Power E OE ...
Страница 2: ...Manual Pa g e of 2 4 Table of Contents Introduction 3 Connections 3 Power Requirements 3 Con fi g urin g The Module 3 Storin g In Memory 3 Resettin g To Factory Default 3 Mode Reference Table 4 Fixin g Method 4 Speci fi cations 4 Ambient Power E OE ...
Страница 3: ...Module Fit momentary push switches between connection and 1 and connection and 2 These are Button 1 and Button 2 respectively By pressin g Button 1 the mode is selected see Mode Reference Table in this document The mode is con fi rmed by the colour of li g ht fl ashin g as shown in the table Press the button repeatedly to step throu g h the modes For certain modes the type of operation can be sele...
Страница 4: ...n 2 selects 0 Power up Cancel new settin g Purple x 2 Previous setting 1 Choose li g ht temperature White x 2 40W tungste n 100W tungste n Haloge n Carbon ar c Fluorescen t mercur y Sodiu m High pressure sodiu m Full white 2 Set colour red Red x 2 Red level low to high 3 Set colour g reen Green x 2 Green level low to high 4 Set colour blue Blue x 2 Blue level low to high 5 Set bri g htness Cyan x ...
