Amber Amber-Pro Скачать руководство пользователя

Страница: 1 / 16

Create The Perfect Heating Schedule

Please note down the scheduled times prior to

beginning programming.
By default, your Amber-Pro will be set to a 5/2 schedule.

To personalise this schedule: Enter schedule mode by

turning off the thermostat and hold the button for

3 seconds until the is displayed on the screen.

5 Day Schedule

You can set the start time for period 1 using the

and buttons
Save your start time by pressing the button, and

again use the and buttons to set the desired

temperature. Press the button to save.
Repeat steps 1 & 2 to set all 6 periods

Weekend Schedule

After completing the 5 day schedule, press the

  button for weekend heating
  The time you select will apply for both Sat and Sun
  Save your start time by pressing the button, and

  use the and buttons to set the desired temperature
  Press the button to advance to period 2
  Set the desired start time and temperature
  Finally, press the button to activate your 7 day

heating schedule

Amber-Pro

Complete Guide

Button

Down

Button

Clock

Button

Power Button

Before programming your Amber-Pro
please ensure you read through all these
settings carefully.

Manual Control

If required you may choose to access manual
control of your Amber-Pro. You can easily
switch between the and your custom
schedule by tapping the button.
When in manual mode, you will see the
manual control mode icon , and can
manually set a desired temperature for your
room by using the and buttons.
The symbol will appear when the desired
temperature is set above the ambient room
temperature.

Frost Protection

An active frost protection feature will ensure
your substrate never falls below 10°C. Helping
to reduce the heat up times and protecting the

floor finish from potential damage.

Having initiated the advanced settings, tap

the button continuously until you see
the frost protection mode (06)

Frost Protection mode is set to ON by default,

to turn off, use the and buttons

Use the

buttons to switch off and save

your settings

Maximum Floor Temperature

Having initiated the advanced settings, tap

the button continuously until you see the

maximum floor temperature mode (09).

Use and buttons to set required

temperature

Press the button to save

2
3

Set Your Ideal Heating Programme

With 3 different options available, choose

the schedule which best suits your lifestyle.
Whether that is all 7 days the same (7day),
5 days and the weekend (5/2), or just 6 days
and just 1 separate day (6/1).

Having initiated the advanced settings, tap

the button until you reach 07 to set your
programme

Use the and buttons to

set which programme you require
(00 = 5/2, 01 = 6/1, 02 = 7 day)

Use the

button to switch off

and save your settings

Alternatively, you can switch off the heating

schedule altogether - to choose manual
mode, simply tap the button during normal
operation.

Sensor Mode

Having initiated the advanced settings, tap the
button to switch to Sensor Mode (02) and set
to 01 by using the and buttons
There are 3 sensor modes available to choose
from, Air Sensor Only (00), Floor Sensor Only (01)
and Air Sensor with Floor Limit (02), you can scroll
through these using the and buttons
Use the

button to switch off and save your

settings

We would recommend Floor Sensor Only (01) for wetrooms where
the thermostat is located outside the heated area or where the

heating is only required for floor warming.

Air Sensor with Floor Limit (02) is used where the thermostat is

located within the heated room and the underfloor heating is the

primary heat source.

DO NOT use Air Sensor (00) for underfloor heating.

Time & Date Setup

With the unit on, simply hold the button

until the minutes begin to flash (5 seconds)

Set the correct time by using the and