Safety information
This message contains information on how to operate AIT 250 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read
these instructions carefully and follow them strictly before operating the device!
• The device uses SELV limited power source. The nominal voltage is +12 V DC. The
allowed voltage range is +10...+30 V DC.
• To avoid mechanical damage, it is advised to transport the device in an impact-proof
package. Before usage, the device should be placed so that its LED indicators are
visible. They show the status of device operation.
• Before unmounting the device from vehicle, ignition MUST be OFF.
• All related devices must meet the requirements of EN 62368-1 standard.
Do not disassemble the device. If the device is damaged, the power supply cables
are not isolated or the isolation is damaged, DO NOT touch the device before
unplugging the power supply.
All wireless data transferring devices produce interference that may affect other
devices which are placed nearby.
Please consult representatives of your vehicle model regarding OBDII location on
your vehicle. In case you are not sure about proper connection, please consult
qualified personnel.
The programming must be performed using a PC with autonomic power supply.
Installation and/or handling during a lightning storm is prohibited.
The device is susceptible to water and humidity.
Amber is not responsible for any harm caused by wrong cables used for
connection between PC and AIT 250
WARNING! Do not use AIT 250 device if it distracts driver or causes
inconvenience due to OBDII placement. Device must not interfere with driver.
Battery should not be disposed of with general household waste. Bring damaged
or worn-out batteries to your local recycling center or dispose them to battery
recycle bin found in stores.
