Ignition wire
ACC line (orange) connects to vehicle's ACC, detecting ignition.
Be sure to check if it's a real ignition wire Le. power does not disappear after starting the engine.
Relay wiring
Relay's white line (85) connects to the positive side of battery (12V) while the yellow line (86)
connects to the device relay control (yellow line on the power cord).
Find the fuel pump in the vehicle and cut off its positive power line. The positive side of fuel pump
connects to the green line (87a) while the side closing to starter motor connects to green line (30)
, as the below chart. Switch of the two green lines have the same effect.
Configuration
If you need to change the setting of the device, you can either text the command to the device, or use
PC tool from supplier.
Note:
Texting command might be filtered by local carrier network deployment. In this case you can text
through web management center provided by the carrier.
Package & Standard accessories
•
Standard package
•
APC400 device
•
Power cable
•
1/0 cable
•
Relay (12V/24V)
•
SOS button cable
