Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the CONTROL PANEL to OFF.
Wait 5 minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5.
If the problem continues, have your outlet and wiring inspected by a professional.
Remote Control Battery Information
•
This remote control uses CR2025
battery (included).
•
Instructions for battery installation are on the Remote Control battery compartment.
NEVER
dispose of batteries in
fire.
Failure to observe this precaution
may result in an
explosion
. Dispose of batteries at your local hazardous material processing center.
