Amazone Groundkeeper Jumbo SMARTCUT Скачать руководство пользователя страница 39

Страница: 39 / 64

Attaching and removing the machine at the tractor's rear three-

point system

Groundkeeper Jumbo SMARTCUT BAF0008.3 05.17

WARNING

Risk of infection from hydraulic fluid escaping at high pressure.

When coupling/uncoupling the hydraulic hose line, ensure that the
hydraulic system is not under pressure on the tractor or machine side.

If you are injured by hydraulic fluid, contact a doctor immediately.

5.4.1

Coupling hydraulic hose lines

WARNING

Risk of crushing, cutting, being trapped or drawn in, or impact
through faulty hydraulic functions when hydraulic hose lines are
incorrectly connected.

When coupling the hydraulic hose lines, please note the coloured
markings on the hydraulic plugs.

•

Check the compatibility of the hydraulic fluids before connecting
the machine to the tractor hydraulic system.

Do not mix any mineral oils with biological oils.

•

Observe the maximum permissible hydraulic fluid pressure of
200 bars.

•

Only couple clean hydraulic connectors.

•

Plug the hydraulic plug(s) into the hydraulic sockets until you can
feel the hydraulic plug(s) locking.

•

Check the coupling points on the hydraulic hose lines, to see if
they are sitting correctly and are sealed.

1. Swivel the actuation lever on the control valve on the tractor to

float position (neutral position).

2. Clean the hydraulic plugs on the hydraulic hose lines before

coupling the hydraulic hose lines with the tractor.

3. Connect the hydraulic hose line(s) to the tractor control unit(s).

5.4.2

Disconnecting hydraulic hose lines

1. Swivel the actuation lever on the tractor control unit on the trac-

tor to float position (neutral position).

2. Unlock the hydraulic connectors from the hydraulic sockets.

3. Protect the hydraulic plug and hydraulic socket against soiling

using the dust protection caps.

4. Store the hydraulic hose lines in the hose cabinet.

Содержание Groundkeeper Jumbo SMARTCUT

































































Результаты поиска

Содержание Groundkeeper Jumbo SMARTCUT

Отзывы:

Бренды по названию

Популярные бренды

Amazone Groundkeeper Jumbo SMARTCUT, Руководство по эксплуатации

Результаты поиска

Содержание Groundkeeper Jumbo SMARTCUT

Отзывы:

Бренды по названию

Популярные бренды