Example figure for wide scarifying:
GHS 1500
1
GHS 1800
2
GHS 2100
3
3.
Install scarifying blades with a width of 3 mm or 2
mm, see page 82.
4.
For narrow scarifying,
install scarifying blades on all of the hook bolts on
the rotor.
NOTE
Narrow scarifying is relatively aggressive and it
suitable for regeneration work in the spring on
grass that is strongly matted with moss.
1
2
3
CMS-I-00003726
6.9.6 Changing or replacing the blades
WARNING
Risk of tipping when the grass collector is
raised
Only raise the grass collector on stable
and level ground.
Never raise the grass collector on slopes
or inclines.
REQUIREMENTS
The PTO shaft drive is switched off.
1.
Completely empty the grass collector
1
.
2.
Lift the grass collector up to the end position for
high tip emptying.
CMS-I-00003341
CMS-T-00004716-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6212-EN-II | C.1 | 12.04.2021
82