manualshive.com logo in svg

Amazone GHS 1500 Drive SmartCut, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone GHS 1500 Drive SmartCut Скачать руководство пользователя страница 83

6.9.3 Checking the blades and blade mounts

 

WARNING 

 

Rotor still running

Risk of drawing in and cutting injuries

As long as the rotor and cutting tools
are moving,

keep the rotor protective cover closed.

 

REQUIREMENTS

The PTO shaft drive is switched off.

1.

Open the rotor protective cover like for changing
the blades, see page 82.

2.

Check the wear on the blades 

1

.

3.

If the wear limit of 7 mm is undercut in the
mounting area,

replace the blade.

CMS-I-00002442

4.

Check the wear on the blade mounts 

1

.

5.

If the wear limit of 6 mm is undercut in the
mounting area,

replace the blade mount.

6.

Check the bolted connections on the blade
mounts for firm seating.

7.

Close the rotor protective cover like for changing
the blades, see page 82.

CMS-I-00002443

6.9.4 Selecting the blades according to the application area

Depending on the application area, the rotor must be
equipped with the right blades. The following table
shows which equipment should be used to achieve
very good work results.

CMS-T-00005190-A.1

CMS-T-00005892-A.1

6 | Preparing the machine

Preparing the implement for operation 

MG6212-EN-II | C.1 | 12.04.2021

77

Содержание GHS 1500 Drive SmartCut











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды