6.
To activate the float position for the drawbar
and the cutting deck,
press the control buttons
1
and
2
simultaneously.
The cage roller and the support wheels guide the
cutting deck over the ground.
The rear wheels only have a supporting function
and compensate for ground undulations between
the right and left wheel.
2
1
CMS-I-00003382
7.
Start the PTO shaft drive on the tractor.
8.
Pay attention to the maximum drive speed.
CMS-I-00000433
NOTE
The sensitivity of the grass collector fill level
indicator depends on the mowed material.
9.
Check the fill level of the grass collector on the
display
1
.
10.
As long as the pointer is in the lower position
2
,
mowed material can still be collected.
11.
When the pointer
3
starts to move,
the grass collector should be emptied.
12.
If the pointer is in the upper position
4
,
the grass collector must be emptied.
CMS-I-00003365
7.2.2 Stopping mowing
DANGER
Rotor still running and ejected objects
Only raise the cutting deck when the rotor
is standing still.
CMS-T-00004781-A.1
7 | Using the machine
Using the implement with electro-hydraulic controls
MG6212-EN-II | C.1 | 12.04.2021
104
