Amazone FTender 1600, Оригинальное руководство по эксплуатации

Страница: 110 / 138

Every 50 operating hours / weekly
Checking the hydraulic hose lines see page 104
Checking the roller chain see page 115
Every 50 operating hours / as required
Cleaning the conveyor section see page 105
Cleaning the hopper see page 107
Every 100 operating hours / as required
Checking the frame connection tightening torque see page 113
Every 100 operating hours / Every 12 months
Checking the wheel bolt tightening torques see page 112
Checking the tyre inflation pressure see page 114
Adjusting the scraper on the T-Pack F see page 114
9.1.2 Checking the top link pin and lower link pin
INTERVAL
daily
1. Check the top link pins and lower link pins for
cracks or broken areas.
2. Replace the pins if there is significant wear.
9.1.3 Checking the hydraulic hose lines
INTERVAL
After initial operation
Every 50 operating hours
or
weekly
1. Check the hydraulic hose lines for damage, such
as chafing point, cuts, tears and deformation.
2. Check the hydraulic hose lines for leaks.
CMS-T-00002330-C.1
CMS-T-00002331-B.1
9 | Repairing the machine
Maintaining the machine
MG6492-EN-II | G.1 | 26.04.2021 104