Adjustments
Cenius 4002-2T BAG0100.2 04.13
69
8.4
Setting the feeler wheels
Adjust the feeler wheels height using the group
of holes so that they run with a 1-3 cm gap
above the ground.
1. Take the eccentric lever out of park posi-
tion.
2. Completely insert the pivot pins of the ec-
centric lever into a suitable hole in the hole
group and release the safety pins.
3. Remove the safety pins.
4. Adjust the feeler wheel by raising or lower-
ing the lever.
5. Fit the safety pin and secure with the lock-
ing pin.
6. Place eccentric lever in parking position and
secure.
Set both feeler wheels at the same height.
Fig. 45
