Amazone Amalog, Руководство по эксплуатации

Страница: 15 / 32

15
AMALOG DB 550-1 05.03
5.2.4 Mode "4" (option)
(Enter the period of time between
the incidence of a fault and the re-
lease of the alarm)
In Mode "4" enter the period of the time between the
incidence of a fault on the tramlining kit or the
counter shaft and the release of the alarm.
I
In the factory the figures "00" (Fig. 2)
have been set.
When "00" is set the monitoring is
switched off.
On conventional seed drills set 22
seconds.
On pneumatic seed drills set 10
seconds.
For setting the period of time
- Press key keep pressed and simultane-
ously press key
in order to
unlock the mode entering.
Press repeatedly until
the display mode "4" (Fig. 2) appears.
Fig. 2
The first figure shows the selected mode "4",
the second figure shows the period of time (e.g. 22
sec., see Fig. 3) between the incidence of a fault on
the tramlining kit or the counter shaft and the release
of the alarm.
- With the aid of the keys or
the period of time, e.g. from 22 sec. to 10 sec.
can be set.
- Press key and store the figure.
Fig. 3
In case of a fault on the tramline kit an audible alarm
sounds and the display (Fig. 4) appears.
Fig. 4