6
Circuit breaker
DO NOT OVERLOAD
the product’s outlets. The product can accommodate
a total equipment load of up to 15 A (1800 W) (whether plugged into a single
outlet or spread out over multiple outlets). If the load exceeds 1800 W, the
circuit breaker built-in into the power switch (B) trips and the outlets stop
providing power (orange indicator goes off).
In case the circuit breaker trips, proceed as below:
1. Unplug all the connected equipment.
2. Press the power switch (B) and make sure the orange indicator is on.
3. Connect all the equipment one by one. While doing so, do not exceed a total load of 1800 W.
Adjusting the rotating outlets
E
180°
180°
Connecting the external equipment
D
• Pull out the cable organizer (D).
• Loop the power cable(s) of the external equipment through the cable organizer (D) and then
connect them to one of the product’s outlet.
To prevent accidental power cuts to the connected equipment, always use the
cable organizer (D).
NOTICE
NOTICE
