AmazonBasics AU1208XB, Инструкция по эксплуатации

Страница: 11 / 12

11 ENGLISH
English
Troubleshooting
•
Position credit card or small piece of
paper over the credit card section of the
Feeder (center position).
•
Try again.
Shredder does not feed or shred credit card or small piece of paper
Warning: DO NOT USE ANY
SPRAY CANS OR AEROSOLS.
!
Shredder is jammed and runs in “Reverse” mode only /
Overload icon is lit in red
1)
Empty if basket full. Carefully remove
paper on shredder head bottom.
2)
Set switch to reverse for 5 sec.
3)
Turn off shredder then pull paper side
to side to remove jammed paper (as
much as possible).
4)
Reduce the number of sheets being
fed (count pages to be sure not to
exceed the maximum sheet count).
1) Turn off shredder.
2) Apply shredder oil to the feed slot
(shredder oil not included). Let oil
soak in to paper and machine for 30
minutes.
3) Set the control switch to Auto/On.
4) Press “Clog-remover” button (FWD>>)
or use thick paper stock/ greeting card
to manually activate the shredder into
cutting mode o push the jam through.
5) Reduce the number of sheets being
fed (count pages to be sure not to
exceed the maximum sheet count).
Refeed the paper.

Reverse for 5 sec

Power Off then pull
paper side to side

Turn off shredder

Press “Clog-remover”

Set switch to Auto

Reduce sheets

Apply shredder oil and
wait for 30min.
Use thick paper to
push jam through
Min
30
Feed in the center
With stubborn situations where the reverse function does not help, follow the steps below:
Or

Empty if bin full.
Carefully remove paper
on shredder
head bottom