Amazon RFQ323, Инструкция по эксплуатации

Страница: 2 / 5

Paper Shredder
Instructions Manual
Installation
Operation
Maintenance
Troubleshooting
Warning
8 Sheets of 20 lb. bond paper*
Paper Shred Size:
CD Shred Size:
Credit Card & CD Capacity
Paper Feed Entry Width
Voltage
8 Sheets of 20 lb. bond paper*
1/4” (0.65 cm) wide strips
4 pieces at 1 3/8” wide
Only one per pass
8 3/4” (22.23 cm)
120V~60Hz / 1.2 A
* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
INSTALLATION
Mount the shredder securely to the rim of the waste basket. (FIGURE 1)
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
Caution: Shredders may have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
OPERATION
Using the switch located on the unit, select one of the following settings by sliding the switch either
left or right.
I
AUTO / ON:
This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop.
O
OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not
in use. (FIGURE 2)
R
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket.
CD DESTROYER / RESET:
This feature destroys CDs into 4 individual pieces, rendering them inoperable. For further
details, please refer to the next page.
CONTINUED NEXT PAGE