9
Step 2 :
Connecting water hose
Step 1 :
•
Close the water valve and remove the water line from the water tank.
•
Connect the t-shaped connector to the water tank.
Make sure that rubber packing is inserted in between.
NOTICE
NOTICE
1
3
2
Regulator
Regulator
cover
Regulate o-ring
Sealing o-ring
Please remove the regulator cover and regulate o-ring under the
following conditions:
Connect the water line to the bottom of the "T" shaped connector.
•
When the water dynamic pressure is lower than 0.05MPa.
•
When the nozzle cannot work normally and water is low.
•
Remove the regulator cover and regulate o-ring except the sealing o-ring.
•
Insert the regulator component into the inlet pipe.
•
Must use the regulator cover and regulate o-ring when the water
pressure is bigger than 0.1MPa.
CAUTION
