11
EN
Operation
• Hold the product by its handle grip and point it
toward the surface to be measured.
• Press and hold the trigger to switch the
product on and begin measuring the surface
temperature. The
SCAN
indicator is shown on
the display. The temperature shown is updated
continuously.
• Release the trigger. The
HOLD
indicator and
the last measured temperature are shown on
the display.
NOTICE
The product automatically powers off
after approximately 10 seconds of inactivity.
Settings
Press and hold the
MODE
button to enter settings
menu. The indicator flashes on the display.
Press the
MODE
button repeatedly to toggle
between 3 available settings:
Emissivity value
Press the
▲
and
▼
buttons to change the
emissivity value between 0.10 and 1.00.
°C / °F unit
Press the
▲
and
▼
buttons to change the unit
between Fahrenheit and Celsius.
