O
PERATOR
’
S
M
ANUAL
AMAZING MACHINERY
2288 GUNBARREL ROAD, SUITE 111-151
CHATTANOOGA, TENNESSEE 37421
PHONE: 1-800-504-7435 FAX: 1-800-504-7436
P
AGE
4
MAINTENANCE PRECAUTIONS
Do not permit acidic, caustic or abrasive fluids to be pumped through system.
Periodically clean detergent inlet screen. This will ensure proper flow of water to the pump.
High mineral content in water may adversely affect your machine and may require the use of a water softener
to ensure proper operation.
NEVER run the pump dry under any circumtances. Doing so will cause exteme damage to the pump.
HEAT EXCHANGER COIL MAINTENANCE
Hard water conditions may eventually cause clogging in the heat exchanger coil if left unattended.
Scale deposits will compromise the heating efficiency and produce an unsafe condition over time.
It may be necessary to descale coil.
Scale buildup from certain detergents may eventually clog up the heat exchanger coil causing an
unsafe condition. Use only recommended detergents for better cleaning efficiency.
Black carbon deposits that collect on the outside wall of the heat exchanger coil may be a result of
using a poor grade of fuel or improper burner operation. Heating fuel should be void of water and
sediments to eliminate the possibility of sooting and compromising the efficiency of the coil.
FAILURE TO MAINTAIN HEAT EXCHANGER COIL MAY
RESULT IN A STEAM EXPLOSION WHICH MAY CAUSE
SERIOUS INJURY OR DEATH.
Maintenance Instructions
MOVING, STORAGE
Place machine in covered area when not in use to protect from elements.Protect machine from
freezing in cold temperatures by storing in a heated location.
TRAILER MAINTENANCE
Daily:
Check wheel bearings. Add grease if necessary.
Daily:
Check tires for proper inflation
.
Daily:
Check trailer for loose equipment. Tighten if necessary.
ENGINE MAINTENANCE
Every time (before start): Check oil level.
First 8 hours:
Change oil with
SAE 30W High-Detergent Oil.
Every 25 hours:
Change oil if operating under heavy load or high ambient temperature.
Service air cleaner pre-cleaner.
Every 50 hours:
Change oil. Clean and inspect spark arrester if equipped.
Every 100 hours:
Service air cleaner cartridge, replace oil filter (if equipped),
Clean oil cooler (if equipped), Clean cooling system.