Battery specifications:
1. TOTAL POWER 12W
2. LI-ION BATTERY 12VDC MAX.
≦
40Wh
3. CHARGER 13.5V 800mA
4. CHARGING TIME 6 HOURS
5. WORKING TIME
≥
200 MINUTES
6. PROTECTIVE VOLTAGE 8.1 V
7. THE VOLTAGE BEFOR DISCHARGING 12.6V
8. LOAD CURRENT 1100mA(INPUT 12.2V HOUR)
TROUBLE SHOOTING
Trouble
Reason / Solution
Blank Screen
1. Change the fuse
2. Recharge the battery or try the wall adapter
3. Check power line and connect it again.
No signal
1. Read the manual again and reconnect it.
2. Check the camera head and screw down
3. Clean the camera pins and the connection area on PCB
Board into the hole
4. Check the pins and find if they are on the same level
The camera has
weak or no light
Press LED button on/off or adjust the LED brightness
setting from
“MENU” button .
No recording
1. Press the “Video” button and set to Video2
2. Press POWER button and the monitor indicator light is green.
3. Use another USB disk /micro SD and try again
Record abnormity
Shut off the unit and restart the unit in right steps
Flashing pictures
1. Deficiency of the battery power. Please recharge the battery
2. Misuse of the charger cable and power cord: switch the
cables
Battery Recharging
Not Working
Misuse of the charger cable and power cord: to use the right
charger cable. Turn off the battery pack if there is completely no
power
16