Enabling Workout Modes of Earbuds and Setting Earbuds
Download the Zepp app and add the earbuds, and then you can work out with the
earbuds on and set the earbuds.
1. Enabling workout modes
<1> Connect to Zepp app for workouts.
The earbuds have a built-in PPG heart rate module, which can detect heart rate data
in real time during workouts and save it to your personal account along with the
workout results. You do not need to turn on the earbuds' workout mode separately.
After you add and pair the earbuds using the Zepp app, the earbuds will
automatically start detecting your heart rate upon you initiate a workout on the app.
<2> Detect running.
With its built-in Gsensor and cutting-edge running detection algorithms, the
earbuds can automatically detect and record running performance even when they
are disconnected from the Zepp app. To enable this feature, tap Running detection
on the device page.
After this feature is enabled, wear the earbuds before running. The earbuds will
automatically enter the workout state and record workout data such as steps and
heart rate. The next time you open the app, the earbuds will automatically upload
the saved data to your personal account.
2. Viewing battery level of the earbuds
