Amav enterprises Power Rider, Руководство пользователя

Страница: 15 / 16

15
PROBLEM POSSIBLE CAUSE SOLUTION
Car was running but has now
stopped or does not run smoothly.
Car only works sometimes.
Car needs a “push” to start.
Fuse blows all the time.
Grinding noise from gear box.
Battery charger is warm during
charging.
Battery sometimes makes a
crackling noise during charging.
Battery does not charge, and
charger is cold.
Loose wires and/or connections.
Fuse is blown.
Too much weight in the vehicle.
Too much stress on the motor due
to driving conditions.
Loose wires and/or connections.
Motor damage or switch damage.
Loose wires and/or connections.
Motor has a dead spot.
Wrong fuse is being used.
Child is switching from forward
to reverse quickly without first
stopping the car.
Gears are broken.
This is normal when charging your
battery. Some chargers will not get
warm. This is not a concern.
This is normal when charging
although it may not happen with
every battery.
There is no power to the charger.
Check all connections and tighten
if loose.
Replace fuse with authorized
replacement part.
Your Power rider™ car is designed
to carry only one child. Total weight
is 55 lbs. (25 kg) Do not attempt to
tow anything.
Avoid inclines of more than 6°. If
conditions are too stressful fuse
may blow. Replace fuse and avoid
stressful conditions.
Check all connections and tighten
if loose.
Call the service number for the
Service Center nearest you.
Check all connections and tighten
if loose.
Call the service number for the
Service Center nearest you.
Use only a 30 amp fuse available
from your Power Rider™Service
Center.
Review with your child, the proper
way to operate the car.
Call the service number for the
Service Center nearest you.
No correction is needed.
No correction is needed.
Make sure the charger is plugged
into a working outlet, or the fuse
may have blown. replace the fuse
or bring your charger to a Service
Center.