Amate Audio NITID N18W, Руководство пользователя

Страница: 14 / 25

NITID N18W_N218W Oct 2017
14
Amate Audio
Limiter
THRESH.
0.0 dB
Limiter
THRESH.
-12.0dB
An asterisk (*) beneath the preset name means that the preset has been
modified using the audio settings. When a new preset is loaded, all the
changes made in the AUDIO Menu will be reverted.
4.4.1. Gain Menu
Inside the Gain menu, the Main input gain may be modified. Press OK to start editing
the Main Gain. The cursor will blink to show that the value is being edited. Use the
Circular key to modify the value.
The gain can be adjusted b3dB and -6dB. The current values is displayed
on the right side of the display (in dB).
When changing the Main Gain settings, the actual sensitivity of the system
is being changed too. When setting the value to +3dB, the input sensitivity
will be reduced by 3dB (from n8dBu to +5dBu).
4.4.2. Limiter Menu
In the Limiter Menu, it is possible to modify the Threshold setting of the internal DSP
peak limiter. Press OK to start editing the THRESH value (left bar). The cursor will
blink to show that the value is being edited. Use the Circular key to modify the value,
and press OK to finish editing.
The level bars TH, GR and OUT provide additional information when an input signal
is connected to the device.

TH (Threshold): Shows the actual value of the limiter threshold (cursor).
Additionally, the bar will display the input level. The level of the threshold in
dB is also displayed next to the bar in figures.

GR (Gain Reduction): This bar shows when the limiter is active (the threshold
value is being exceeded by the input level). The gain reduction level will
display as an inverted VU bar (see Fig. 13, right).
M:0.00
Gain
M:1.00
Gain Main
Fig. 12. Gain display (left) and Gain Main while editing (right)
Fig. 13. Limiter display (left) and Limiter Threshold while editing (right)