Amate Audio
KEY Series (Passive). Version 1.2
Sept16
11
KEY8
KEY12
KEY15
Horizontal flying
2&5 or 3&6 or 9&10 or 11&12 (front rigging points)
1&4 or 7&8 (back tilt points)
Vertical Flying
2&3 or 5&6 or 9&11 or 10&12 (front rigging points)
1 or 4 or 7 or 8 (back tilt points)
KEY10
Horizontal flying
2&5 or 3&6 or 8&9 or 10&11 (front rigging points)
1&4 (back tilt points)
Vertical Flying
2&3 or 5&6 or 8&10 or 9&11 (front rigging points)
1 or 4 or 7 (back tilt points)
We offer as optional accessory the ACR M8 eyebolt.
3.7.3. KEY8, KEY10, KEY12 and KEY15 flying with SP35 wall stand
These models may be wall mounted by the SP35 wall stand accessory.
Fig.17.
SP35 wall stand
Mounting:
1- Hold the wall stand against the mounting surface, so you can mark the locations of
the mounting holes
2- Drill corresponding pilot holes on the wall and attach the bracket with screws
3- Set the cabinet on the 35mm pole
4- Adjust the cabinet for desired angle
3.7.4. KEY8, KEY10, KEY12 and KEY15 vertical flying with “HR” bar
Use HR-C or HR-C/GT flying bar for KEY8
Use HR-S or HR-S/GT flying bar for KEY10
Use HR-L or HR-L/GT flying bar for KEY12
Use HR-L or HR-L/GT flying bar for KEY15