Amart Furniture VULCAN 73618, Инструкция по сборке

Страница: 9 / 10

Light Strip Control Mode
“OVERVIEW:‐ These lounges have the ability to operate the lighting independently or in conjunction
with each other. Following this simple guide will show you how to get your lounges to communicate
with each other or to disable the feature. This unified lighting feature uses radio transmitters to send
signals to the other lounges to turn the lights on and off and the push of a single button”
If both 3Seater and 2Seater have been regularly collected like this, the light strips of them are originally
turned on or off independently, but can be changed to be conjunction with each other by yourself.
Independent Control‐Original
•
The light strip of 2Seater lounge can be turned on or off by any one switch at 2Seater.
•
The light strip of 3Seater lounge can be turned on or off by any one switch at 3Seater.
Conjunct Control‐Do It Yourself
•
The light strip of the 3Seater and 2Seater can be together turned on or off by any one switch at
2Seater or 3Seater after your operations below.
a. Disconnect power to both the lounges by turning off their power points and removing power
plugs from the wall
b. With 2 people, carefully turn the lounges onto back of a piece of cardboard or carpet to protect
covering, then find program box of each switch inside zip pockets at bottom of two arms of them.
c. Re‐program two switches of 3Seater or 2Seater to make the programming of them being the same.
For example, if the original programming of 3Seater is all ‘OFF’ , but the original programming of 2Seater
is one ‘ON’ , then you can change the programming of 2Seater to be the same as 3Seater as below.
Program Box
Program Box
All ‘OFF’ combination
One ‘ON’ combination
All ‘OFF’ combination
One ‘ON’ combination
IMPORTANT INFORMATION
•
All re‐programming operations MUST be done with the POWER DISCONNECTED
•
The program combination of two switches of the same lounge must be the same