Amart Furniture VULCAN 73617, Инструкция по сборке

Страница: 8 / 8

Light Strip Control Mode
“OVERVIEW:‐ These lounges have the ability to operate the lighting independently or in conjunction
with each other. Following this simple guide will show you how to get your lounges to communicate
with each other or to disable the feature. This unified lighting feature uses radio transmitters to send
signals to the other lounges to turn the lights on and off and the push of a single button”
If the same 3Seater or 2Seater have been collected like these, the light strips of any one collection are
originally turned on or off in conjunction with each other, but can be changed to be independent
by yourself.
Conjunct Control‐Original
•
The light strips of the 2Seater lounges can be together turned on or off by any one switch at any
2Seater.
•
The light strips of the 3Seater lounges can be together turned on or off by any one switch at any
3Seater.
Independent Control‐Do It Yourself
•
The light strip of 3Seater or 2Seater can be only turned on or off by two switches of itself after
following operations on one 3Seater or 2Seater of the collections above.
a. Disconnect the power to the lounge by turning off the power point and removing power
plug from the wall
b. With 2 people, carefully turn the lounge onto back of a piece of cardboard or carpet to protect
covering, then find program box of each switch inside zip pockets at bottom of two arms of it.
c. Re‐program two switches of the lounge. For example, if the original programming of the lounge is
one ‘ON’ , then you can change the programming to all ‘OFF’ as below.
Program Box
Program Box
All ‘OFF’ combination
One ‘ON’ combination
IMPORTANT INFORMATION
•
All re‐programming operations MUST be done with the POWER DISCONNECTED
•
The program combination of two switches of the same lounge must be the same
One ‘ON’ combination
All ‘OFF’ combination